Stencil making materials

Stencil making chemicals
Our original products
　　　　　　　　　　　　　　
Part number Features Packaging Operating instructions
ST-32H Stencil hardener, 2 liquids, A+B, for improving printing durability. 2kg/set, 10kg/set operating instructions
ST-10R Emulsion remover, no dilution required. 2kg/bottle, 10kg/pack operating instructions
ST-80D Degreaser for polyester/nylon mesh (dilutable) 1kg/bottle operating instructions
ST-55D Degreaser for stainless wire mesh (dilutable) 1kg operating instructions
Hardener HF Stencil hardener containing fluorine compound, 2 liquids, A+B. 2kg/set -
SAATI（FOTEC）brand imported product
Part number Features Packaging Operating instructions
2003 Alkaline screen degreaser 2kg/set, 20kg/set operating instructions
2033 Concentrated solution (usually diluted 10 times with water) of 2003 1 liter -
2023 A gel-type chemical that abrase and degrease polyester / nylon mesh at once 1kg operating instructions
2004 Emulsion remover, no dilution required 1 liter operating instructions
2048 Concentrated solution of 2004 (to be diluted with 30 times of water) 500ml operating instructions
2025 Highly wettable aqueous solution for direct-indirect film application 1 liter operating instructions
2061 Block out, can be used as touch-up pin holes and fish eyes also 1 liter operating instructions
Indirect film

This is an indirect method film in which the film is exposed, developed, and an image is formed on it, and then attached to a screen.

Product name Size Applications
Autotype five star 104cm (W) x 3m (L) General printing
Direct-indirect film

Lines of Capillex (dual cure), CDF/Vision (dual cure) and CDF/QT (SBQ) are available.

View the specifications table

Photosensitive emulsion

Our original products and Kurita Kagaku brand products are lined up.
Contact us for detail information.

View the specifications table

Marking label

These labels are mainly used to point out the pinholes or defects when making stencils or PS plate. They can also be used in clean room.

Product Name Applications catalog
Ma-kun Inspection of plate making, glass and film artwork. Can be used at the inspection of printed matter, etc. PDF（1MB）pdf
Manual coating trough
Manual Coating Trough

Tool for coating photosensitive emulsion onto to screen mesh. Various sizes are available.
Contact us to specify the size you need. It is made from stainless sheet, and its thickness is 0.6mm or 0.7mm.

Frame adhesive
Part number Features Quantity
FN1003 modified A
(instant glue)		 Good water resistance (wash ability), and smooth permeability into mesh opening that realizes strong adhesion. 50g/bottle
Alpha screen
rock spray		 Aerosol type curing accelerator 420ml/can
G17Z Synthetic rubber type, does not contain toluene, xylene or plasticizers 1kg、3kg、15kg
TM sheet

This is a cutting screen plate making sheet that does not require a stripping liquid. It can be made quickly and easily with a cutting plotter, to make stencils environmentally friendly.

Part number Size
TM seat type 38 1060mm x 30m, 530mm x 30m (2 rolls)
Frame tape and tape cutter
Product Name Features Standard
Neo UV tape Exposing can be processed after taping because this tape passes UV light. 40-80mm x 100m roll
Neo matte tape Matte silver is kneaded into the surface, that makes this tape resistant to dirt and fingerprints (opaque).
Polyester tape Transparent tape made from PET resin Thickness 25μ, 50μ
Product Name Features Specification table
Tape cutter Automatic tape cutting machine that is bobbin-free and can handle any size tape View product details
Screen frame
Product Name Features Specification table
Aluminum pipe frame Please see the specifications table for the cross-sectional diagram of the frame material. Angle frames are also available. View the specifications table
（94KB）

We also handle cast frames, wooden frames, and die-cast frames (aluminum alloy frames). Please feel free to contact us.